How to Fix a Leaking Toilet – DIY Guide


How to Fix Leaking a Toilet Img

Identifying and repairing a problem with a leaky toilet in the have does not have to be difficult for you or your family if you understand what to do. Fortunately, there is a lot of information available on a wide range of different related sites that address these repair issues with comprehensive detail guide and instructions.

So, for those of you who are dealing with a leaky toilet and need to know what you can do to fix it, here are some simple and necessary steps that you need to follow to complete this kind of job in your home.

When this happens, you may not be in a position to call a plumber. After all, plumbers can be expensive. In this article, we will present you with the information you need to fix your toilet and do a good job.

3 Signs of a Toilet Leak

Toilet leaks do not sneak up you or play some sort of covert game. They give you plenty of apparent signs letting you know that your toilet is leaking and they need to be fixed right away. Here are three signs letting you know you have a toilet leak.

  1. It doesn’t matter where your toilet is located, water on the floor indicates a toilet is a leak.
  2. If you have an upstairs toilet, then you will see water stains on the ceiling on the floor below.
  3. Your nose picks up a sewer like odor coming from your bathroom or surrounding area.

The tools needed to depend on how serious the leak is. To fix a simple leak, all you will need are:

  • Wrench
  • Screwdriver
  • Hacksaw
  • Flat scraper
  • Wax ring
  • Two nuts, bolts & washers
  • A tube of silicone caulking
  • Shims: that is if your toilet was not stable

Don’t Miss To Read: ProFlo Toilet Review in 2021

Plumbing Problems You SHould Not DIY Img

How to Fix your Leaking Toilet

Step 1: Inspect the Float and Inlet Valve for Problems

The first step in fixing a leaky toilet is to look inside of the tank to find the problem. In many cases, the problem may be related to at least one of two issues that need to be repaired, a faulty float or inlet flush valve on the ballcock. In either case, follow these recommendations.

To identify a problem with the float, look to see if the water level rises above the overflow tube. To identify a problem with the inlet valve on the float, you will need to a flushing toilet and then gently lift the rod that is attached to the float until the water stops. If the water in the tank does not stop running, you have a problem with the inlet valve.

Inspect the Float and Inlet Valve for Problems Img

Step 2: Adjust the Float

You can adjust the level of the float in the tank by using the screw at the top of the ballcock. However, if this adjustment does not stop the water from running inside of the overflow tube, you may need to repair the float itself.

For example, if the float is lying too low in the water or there is a hole in it, the water in the tank will not rise fully enough for the inlet valve to be automatically tripped. Whatever the case, purchasing a new red or the float is not expensive and they are easy to replace.

Step 3: Turn off the Water

If you inspect the inlet valve and the water does not stop, there is a problem with the ballcock. Therefore, it is time to replace the entire assembly. To complete this part of the process, you will need to turn off the water from the shutoff valve and then flush the toilet to remove all of the water from the tank.

Don’t Miss To Read: EAGO Toilet Reviews in 2021 – Complete Buyer’s Guide

Turn off the Water Img

Step 4: Replace the Assembly

To replace the assembly, you will need to remove the supply line from the toilet ballcock and then use your slip joint pliers to take the nut off that secures the ballcock to the tank. Once removed, you can lift out the assembly and then install the new assembly by dropping it in place.

When complete, look underneath the tank to thread the new nut. Tighten it with the pliers securely but do not crack the tank. Reinstall the supply line, clip the new refill tube inside of the tank. Turn the water at the shutoff back on.

Final Verdict

Repairing a leaky toilet in one of the bathrooms in your home is not a difficult problem to fix if you are familiar with the steps that it takes to make the essential repairs.

Thankfully, due to all of the detailed instructions and information that is available to you and other consumers online, these jobs can be done with a lot more ease and precision every time. It is also necessary to remark that by performing these jobs in your own home, you can save a lot of frustration time and money.

Related Post